technical data sheet smp attenuator plug/jack 19AS101-K06E3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 dieses dokumen t ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/09.14/6.2 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to mil-std-348 documents n/a material and plating connector parts material plating center contact cube gold, min. 1.27 m, over nicke l outer contact - plug brass gold, min. 0.8 m, over nickel outer contact - jack cube gold, min. 0.8 m, over n ickel dielectric ptfe substrate al 2 o 3
technical data sheet smp attenuator plug/jack 19AS101-K06E3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 dieses dokumen t ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/09.14/6.2 electrical data frequency range dc to 18 ghz return loss 3 20.8 db, dc to 4 ghz 3 16.5 db, 4 ghz to 12.4 ghz 3 14.0 db, 12.4 ghz to 18 ghz attenuation 6 db 1.0 db, dc to 12.4 ghz 6 db 1.5 db, 12.4 ghz to 18 ghz power handling 0.5 w at 25c mechanical data mating cycles if mating part is limited detent 3 500 center contact captivation 3 7 n engagement force - limited detent 45 n max. disengagement force - limited detent 9 n min. environmental data temperature range -55c to +155c rohs compliant packing standard 1 pce in bag weight 3.23 g/pce draft date approved date rev. engineering change n umber name date kerstin herzog 16.06.06 markus mller 07.11.16 e00 15-1629 marion striegler 07.11.16 while the information has been carefully compiled t o the best of our knowledge, nothing is in tended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
